MEGA M-PR 3.1
Semi-Automatic Concrete
Block and Paving Machine

Build a practical production line for hollow blocks, paving units, curbstones and hollow-floor blocks with one semi-automatic machine and interchangeable moulds.

Semi-AutomaticOperation

Up to 5,000 Blocksper 8-Hour Shift*

Published Installed Power29 kW*

Typical Installation1–3 Days*

*Published planning figures, not guaranteed output. Final performance and configuration depend on the selected mould, product geometry, mix design, electrical standard, operator workflow, site readiness and written quotation.

Understandable Semi-Automatic Production

The M-PR 3.1 combines material preparation, transfer, hydraulic pressing, vibration, pallet output and manual pallet movement. Operators remain responsible for mix quality, machine control, fresh-product handling, curing and daily workflow.

Prepare the concrete mixControl raw-material proportions and consistency for the selected product.
Transfer material to the mouldMove the prepared mix through the published hopper and conveyor configuration.
Vibrate and pressRun the hydraulic and vibration cycle for the installed mould.
Move fresh productsTransfer the pallet from the output table to the curing area.
Cure, return and repeatOrganize curing, pallet return and a steady operator workflow.

A Complete Production Set Built Around the Press

The published M-PR 3.1 configuration connects material preparation, transfer, pressing and vibration, pallet output and manual handling in one practical production flow.

01
Aggregate Hopper
Receives the selected aggregates for the production line.
02
Aggregate Transfer Conveyor
Carries aggregates from the hopper to the mixer.
03
Concrete Pan Mixer
Prepares the concrete mix for the selected product.
04
Mortar-System Electrical Panel
Controls and protects the material-preparation equipment.
05
Mortar Conveyor
Transfers the prepared mix toward the press.
06
MEGA M-PR 3.1 Machine
Forms products with the installed mould, hydraulic pressure and vibration.
07
Hydraulic System
Supplies the hydraulic functions used during the production cycle.
08
Machine Electrical System
Controls and protects the machine-side electrical functions.
09
Pallet Output Table
Receives fresh products after the forming cycle.
10
Manual Pallet Trolleys
Support manual movement of fresh products to the curing area.
11
One Selected Product Mould
Configures the machine for the agreed product and dimensions.

Published configuration summary. The written quotation defines final quantities, motor specifications, pallets, mould, electrical standard, packing, freight, installation scope and exclusions.

One Machine. Multiple Product Families.

Change the mould and production settings to manufacture the product families required in your market. Dimensions, cavities per cycle and expected output are confirmed during project configuration.

Rows of freshly produced hollow concrete blocks curing in a production yard — Hollow and Solid Blocks

Fresh interlocking paving units produced by a MEGA M-PR 3.1 machine — Paving Units

Curbstone produced with the MEGA M-PR 3.1 — Curbstones

Hollow-floor block produced with the MEGA M-PR 3.1 — Hollow-Floor Blocks

Published example	Dimensions	Output / 8 hours*
Hollow block	100 × 400 × 200 mm	5,000 pieces
Hollow block	150 × 400 × 200 mm	4,000 pieces
Hollow block	200 × 400 × 200 mm	3,000 pieces
Paver PBM-001	160 × 200 mm	250 m²
Paver PBM-007	120 × 240 mm	225 m²
Paver PBM-002	100 × 200 mm	275 m²
Curbstone CSM-009	150 × 500 × 300 mm	3,000 pieces

*Published output examples under suitable operating conditions. Actual production varies by mould, product geometry, mix design, operator workflow, site conditions and stoppages.

MACHINE CUSTOMIZATION

Configure Your MEGA M-PR 3.1

Choose the chassis, internal-part and cover colors. Preview your combination and send it with your quote request.

MEGA M-PR 3.1 orange chassis — YOUR CONFIGURATION **Orange chassis · White internal parts · No cover · Lights on**

MEGA M-PR 3.1 white internal components — YOUR CONFIGURATION **Orange chassis · White internal parts · No cover · Lights on**

SELECTED CONFIGURATION MPR-OR-WH-NC-L1

ChassisOrange

Internal PartsWhite

CoverNone

Working Lights On

Request This Configuration

Preview ready.

Colors shown are indicative. Final paint tones and availability are confirmed with your quotation.

Plan the Complete Production Area

The machine-only footprint is approximately 1,730 × 3,700 mm. A complete project also needs clear areas for raw materials, mixing, operator access, pallet movement, curing and finished-product storage.

Raw-material storage and delivery access
Mixing, machine and operator working zones
Fresh-product transfer and curing flow
Electrical supply, water and safe maintenance access
Finished-product handling and loading space

Raw-Material Storage

Mixing and Preparation

Material and Pallet Flow

MEGA M-PR 3.1

Fresh-Product Curing and Finished-Product Storage

Illustrative workflow · not to scale

Factory preparation and shipment

Reference records are described as factory preparation and shipment unless a completed installation is independently documented.

Support through first production

Configuration guidance, shipment preparation, installation support, operator training, warranty and spare-parts terms are defined in the written commercial documents.

Factory Preparation and Shipment References

Explore M-PR 3.1 factory-preparation and shipment records connected to this VBM Suite product.

MPR 3.1 Production Preparation for Zimbabwe

Manufacturing, testing and delivery preparation of a MEGA MPR 3.1 production line intended for Zimbabwe.

Zimbabwe
MPR 3.1

MPR 3.1 Production Line Shipment to Medina, Saudi Arabia

A MEGA MPR 3.1 production line prepared and shipped to Medina, Saudi Arabia.

Saudi Arabia
MPR 3.1

MPR 3.1 Production Line Shipment to France

A MEGA MPR 3.1 production line prepared and shipped to France.

France
MPR 3.1

Frequently Asked Questions

Is the MEGA M-PR 3.1 fully automatic?

No. It is a semi-automatic machine. Operators remain responsible for defined parts of mix preparation, machine control, pallet movement, curing and daily site workflow.

What can the M-PR 3.1 produce?

With the appropriate mould, the published range includes hollow and solid blocks, paving units, curbstones and hollow-floor blocks. Compatibility and output must be confirmed for the selected product dimensions.

How should the published output figures be used?

They are planning examples, not guaranteed production. Actual output varies with mould geometry, concrete mix, operator rhythm, pallet flow, curing logistics and stoppages.

What are the electrical requirements?

The current published installed-power figure is 29 kW. Voltage, phase, frequency, motor list and destination-specific requirements are confirmed in the written quotation.

What is included in the production set?

The published scope combines an aggregate hopper and transfer conveyor, pan mixer, mortar-system panel and conveyor, the M-PR 3.1 press, hydraulic and electrical systems, pallet output table, manual trolleys and one selected mould. Final quantities and exclusions are defined in writing.

How are installation, training, warranty and spare parts handled?

The final quotation and commercial documents define site-readiness requirements, travel and installation scope, operator training, warranty coverage, included spare parts, freight and service conditions.

Configure the M-PR 3.1 for Your Market

Tell us the products and dimensions you plan to manufacture, your electrical standard, required output and delivery country. Our team will confirm the suitable moulds, complete-line scope and current commercial offer.

MEGA M-PR 3.1 Semi-Automatic Concrete Block and Paving Machine